Skip to content
 

Machine Knitting a Baby Set – Beanie – Passap

This pattern is for a Pink Passap knitting machine.

OK folks! At first I am just going to paste the pattern instructions straight in here, for those of you who know what a Knitting Machine is all about, go for it!

For beginners wanting to learn how to machine knit a Baby Set, I will slowly add the full instructions with photos and movies as I get the time.

After completing the Baby Beanie, please continue to the Baby Jacket or the Baby Booties.

Fae Mason’s Passap Baby Set – Beanie

One end Cashmillon & one end silky (low bulk)

52/51 (if you feel it is too small try 56/55)
Tension 3/3
Pink Strippers.
**Zig zag row from right to left.  Cast on comb in. Small weight outside each end of knitting.
Pushers on back bed 1 up 1 down
AX/N  – no arrows K 5 rows (no strippers in for 3 rows)
AX/N  – left arrow in K 2 rows.**   This = 8 r.
Tension 2½/2½
N/N K 20 r.
Tension 3½/3½
Pushers on front bed 3 up & 1 down (or 2 & 1 or 1 & 1)
*N/AX – K 2 rows
N/AX – left arrow in, K 2 rows*
Repeat from * to * for 52 rows (or 56 or 60 rows)
Tension 2½/2½
N/N K 10 r
Tension 2¼/2¼
Handle up Rib 1 x 1 for 10 r. Latch tool off or thread yarn through each stitch and pull up.

2 Comments

  1. Diane says:

    Could this be made on a brother knitting machine?

  2. Jane Charbonneau says:

    Thank-you so much for putting the Passap patterns on the ‘net. Passap patterns are
    very difficult to find. I am looking forward to making this baby set!

Leave a Reply